Debut: April 2016

 




   

.: Roger Stone's North American Harvard "Red Checkers" (NZ1976) of New Zealand

Brand:

Academy
12460

Scale:

1/72

Modelling Time:

~25 hrs

PE/Resin Detail:

none

Comments:

"International Orange is Fluorescent Orange over Italian Red.
Decals from Ventura (NZ). "

North American T-6 Texan

From Wikipedia, the free encyclopedia
This article is about the first T-6 Texan. For the newer Beech aircraft, see Beechcraft T-6 Texan II.
T-6 Texan/SNJ/Harvard
AT-6C Texans in flight 1943.jpg
USAAF AT-6Cs near Luke Field, 1943
Role Trainer aircraft
National origin United States
Manufacturer North American Aviation
First flight 1 April 1935
Retired 1995 (South African Air Force)
Primary users United States Army Air Forces
United States Navy
Royal Air Force
Royal Canadian Air Force
Number built 15,495
Developed from North American NA-16
Variants North American A-27

The North American Aviation T-6 Texan is a single-engined advanced trainer aircraft used to train pilots of the United States Army Air Forces (USAAF), United States NavyRoyal Air Force and other air forces of the British Commonwealth during World War II and into the 1970s. Designed by North American Aviation, the T-6 is known by a variety of designations depending on the model and operating air force. The United States Army Air Corps (USAAC) and USAAF designated it as the AT-6, the United States Navy the SNJ, and British Commonwealth air forces, the Harvard, the name it is best known by outside of the US. After 1962, US forces designated it the T-6. It remains a popular warbird aircraft used for airshow demonstrations and static displays. It has also been used many times to simulate various Japanese aircraft including the Mitsubishi Zero in movies depicting World War II in the Pacific.

Development

North American T-6 Texan race start 2014 Reno Air Races
An original T-6 Texan aircraft (painted as a US Navy SNJ), right, with the new T-6 Texan II, left, at Randolph Air Force Base, Texas, in 2007
South African Air Force Harvard under restoration exposing internal structure
Student (L, front) and instructor (R, aft) cockpits

The Texan originated from the North American NA-16 prototype (first flown on April 1, 1935) which, modified as the NA-26, was submitted as an entry for a USAAC "Basic Combat" aircraft competition in March, 1937. The first model went into production and 180 were supplied to the USAAC as the BC-1 and 400 to the RAF as the Harvard I. The US Navy received 16 modified aircraft, designated the SNJ-1, and a further 61 as the SNJ-2 with a different engine.

The BC-1 was the production version of the NA-26 prototype, with retractable tailwheel landing gear and the provision for armament, a two-way radio, and the 550 hp (410 kW) R-1340-47 engine as standard equipment. Production versions included the BC-1 (Model NA-36) with only minor modifications (177 built), of which 30 were modified as BC-1I instrument trainers; the BC-1A (NA-55) with airframe revisions (92 built); and a singleBC-1B with a modified wing center-section.

Three BC-2 aircraft were built before the shift to the "advanced trainer" designation, AT-6, which was equivalent to the BC-1A. The differences between the AT-6 and the BC-1 were new outer wing panels with a swept forward trailing edge, squared-off wingtips and a triangular rudder, producing the canonical Texan silhouette. After a change to the rear of the canopy, the AT-6 was designated the Harvard II for RAF/RCAF orders and 1,173 were supplied by purchase or Lend Lease, mostly operating in Canada as part of the British Commonwealth Air Training Plan.

Next came the AT-6A which was based on the NA-77 design and was powered by the Pratt & Whitney R-1340-49 Wasp radial engine. The USAAF received 1,549 and the US Navy 270 (as the SNJ-3). The AT-6B was built for gunnery training and could mount a .30 in machine gun on the forward fuselage. It used the R-1340-AN-1 engine, which was to become the standard for the remaining T-6 production. Canada's Noorduyn Aviation built an R-1340-AN-1-powered version of the AT-6A, which was supplied to the USAAF as the AT-16 (1,500 aircraft) and the RAF/RCAF as the Harvard IIB(2,485 aircraft), some of which also served with the Fleet Air Arm and Royal Canadian Navy.

In late 1937 Mitsubushi purchased two NA-16s as technology demonstrators and possibly a licence to build more. However, the aircraft developed by Watanabe/Kyushu as the K10W1 (Allied code name Oak) bore no more than a superficial resemblance to the North American design. It featured a full monocoque fuselage as opposed to the steel tube fuselage of the T-6 and NA-16 family of aircraft, as well as being of smaller dimensions overall and had no design details in common with the T-6. It was used in very small numbers by the Imperial Japanese Navy from 1942 onwards. After the war the Japanese Air Self Defense Force operated Texans.

The NA-88 design resulted in 2,970 AT-6C Texans and 2,400 as the SNJ-4. The RAF received 726 of the AT-6C as the Harvard IIA. Modifications to the electrical system produced the AT-6D (3,713 produced) and SNJ-5 (1,357 produced). The AT-6D, redesignated the Harvard III, was supplied to the RAF (351 aircraft) and Fleet Air Arm (564 aircraft). The AT-6G (SNJ-7) involved major advancements including a full-time hydraulic system and a steerable tailwheel and persisted into the 1950s as the USAF advanced trainer.

Subsequently the NA-121 design with a completely clear rearmost section on the canopy, gave rise to 25 AT-6F Texans for the USAAF and 931, as the SNJ-6 for the US Navy. The ultimate version, the Harvard 4, was produced by Canada Car and Foundry during the 1950s, and supplied to the RCAF, USAF and Bundeswehr.

A total of 15,495 T-6s of all variants were built.

Please go to Wikipedia, if you want any further information

Thanks Wikipedia!

Click on each image for a closer look

Box art:

Web site contents Copyright Eastern Suburbs Scale Modelling Club 2016, All rights reserved.