Debut: July 2017



.: Bruce Hands' Kfz. II VW Typ 166 Schwimmwagen





Modelling Time:

3 days

PE/Resin Detail:



"Old kit but still good.
Could really use some extra detail.
Dashboard decals, late war options, better detail seats and an engine would be nice & Ammo cans & Jerry cans. "

That's called "After-market", Bruce!!....RjT

Volkswagen Schwimmwagen

From Wikipedia, the free encyclopedia
Volkswagen Type 166 'Schwimmwagen'
VW Schwimmwagen 1.jpg
Manufacturer Volkswagen
Production 14,265 (1942–44)
Body and chassis
Related VW type 86 & 87
Engine 4-cyl. boxer, air cooled
1,131 cc, 25 hp @ 3,000 rpm
Transmission 4-speed manual
2-speed transfer case;
4WD only on 1st gear / reverse
Wheelbase 200 cm (78.7 in)
Length 382.5 cm (150.6 in)
Width 148 cm (58.3 in)
Height 161.5 cm (63.6 in)
Curb weight 910 kg (1,345 kg GVW)

The VW Type 128 and 166 Schwimmwagen (literally Floating/Swimming Car) were amphibious four-wheel drive off-roaders, used extensively by German ground forces during the Second World War. The Type 166 is the most numerous mass-produced amphibious car in history.[1]


A Schwimmwagen, preserved in Brazil, being demonstrated (2004)

Volkswagen Schwimmwagens used the engine and mechanicals of the VW Type 86 four-wheel drive prototype of the Kübelwagen and the Type 87 four-wheel drive 'Kübel/Beetle' Command Car, which in turn were based on the platform of the civilian Volkswagen BeetleErwin KomendaFerdinand Porsche's first car body designer, was forced to develop an all-new unitized bodytub structure since the flat floorpan chassis of the existing VW vehicles was unsuited to smooth movement through water. Komenda patented his ideas for the swimming car at the German Patent office.

The earliest Type 128 prototype was based on the full-length Kübelwagen chassis with a 240 cm (7.9 ft) wheelbase. Pre-production units of the 128, fitted with custom welded bodytubs, demonstrated that this construction was too weak for tough off-roading, had insufficient torsional rigidity, and easily suffered hull-ruptures at the front cross-member, as well as in the wheel-wells. This was unacceptable for an amphibious vehicle. The large-scale production models (Type 166) were therefore made smaller, and had a wheel-base of only 200 cm (6.6 ft).

VW Schwimmwagens were produced by the Volkswagen factory at Fallersleben / Wolfsburg and Porsche's facilities in Stuttgart; with the bodies (or rather hulls) produced by Ambi Budd in Berlin. 15,584 Type 166 Schwimmwagen cars were produced from 1941 through 1944; 14,276 at Fallersleben and 1,308 by Porsche. Given these numbers, the VW 166 is the most mass-produced amphibious car in history.[citation needed] Only 189 [2] are known by the Schwimmwagen Registry to remain today, and only 13 have survived without restoration work.[3]


Spartan interior of the Schwimmwagen

All Schwimmwagen were four wheel drive only on first gear (and reverse gears with some models) and had ZF self-locking differentials on both front and rear axles. Just like the Kübelwagen, the Schwimmwagen had portal gearrear hubs that gave better ground clearance, while at the same time reducing drive-line torque stresses with their gear reduction at the wheels.

When crossing water a screw propeller could be lowered down from the rear deck engine cover. When in place a simple coupling provided drive straight from an extension of the engine's crankshaft. This meant that screw propulsion was only available going forward. For reversing in the water there was the choice of using the standard equipment paddle or running the land drive in reverse, allowing the wheel-rotation to slowly take the vehicle back. The front wheels doubled up as rudders, so steering was done with the steering wheel both on land and on water.


  • Hermann Göring with a Schwimmwagen at Carinhall

  • German officers in a Schwimmwagen in France in 1944

  • Schwimmwagen from the December 1944 issue of the Intelligence Bulletin

  • Schwimmwagen at the Imperial War Museum Duxford

  • Schwimmwagen interior

  • Type 166 Schwimmwagen

  • Schwimmwagen at the Army Museum Dresden

  • Detail of Schwimmwagen propeller


Thanks Wikipedia!

Click on each image for a closer look

Box art:

Web site contents Copyright Eastern Suburbs Scale Modelling Club 2017, All rights reserved.